How To Protect ADSS Fiber Optic Cables During Transportation & Installation?

HOW TO PROTECT ADSS FIBER OPTIC CABLES DURING TRANSPORTATION & Installation?

In the process of transportation and installation of ADSS cable, there will always be some problems. 

How to avoid such problems? Without considering the quality of the optical cable itself, the following points need to be awared of. The performance of the optical cable is not "actively degenerate". 

1. The fiber cable reel with optical cable should be rolled in the direction marked on the side panel of the reel. The rolling distance should not be too long, generally not more than 20 meters. 

2. special lifting tools should be used when loading and unloading optical ADSS cables.

3. It is strictly forbidden to lay or stack the optical cable reels with optical cables, and the optical cable reels in the carriage must be fortified with wooden blocks.

4. The optical cable should not be reversed multiple times to avoid the integrity of the internal structure of the optical cable. Before laying the optical cable, a visual inspection, check the specifications, model, quantity, test length and attenuation, etc., should be carried out for single-reel inspection and acceptance.

5. During the installation process, it should be noted that the bending radius of the optical cable shall not be less than the construction regulations, and the optical cable shall not be excessively bent.

6. The overhead optical cable should be pulled by pulleys. The overhead optical cable should avoid friction with buildings, trees and other facilities, avoid dragging the ground or rubbing with other sharp and hard objects and damage the outer skin of the optical cable. If necessary, protective measures should be installed.