Products
PRODUCTS
position:Home Page >> Products >> Fiber Cable >> GYTA53
introduction
The fibers,250 um, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE] for cable with high ber count, locates in the center of core as a metallic strength member. Tubes (and Fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate(APL) is applied around the cable core, which is filled with the lling compound to protect it from water ingress, Then, the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally appliedover the inner sheath, the cable is completed with a PE outer sheath.
Stranded Loose Tube Armored Cable GYTA53
【Characteristics】
Good mechanical and temperature performance;
Hiqh strength loose tube that is hydrolysis resistant;
Crush resistance and fexibility;
The following measures are taken to ensurethe cable watertight;
Steel wire used as the central strength member;
Loose tube flling compound;
100% cable core filling;
APL moisture barrier;
PSP enhancing moisture-proof;
Water-blocking material;
Application: Duct/Aerial/Direct burial
Technicle parameter
Storage/Operating Temperature: -40°C to + 70°C
next:没有了！
back